Sindoh 3DWOX 7X - Preparations for Machine Operation; Machine Specifications

Preparations for Machine Operation
1-2
1
1. Machine Specifications
1.1 Printing
Printing Method Fused Filament Fabrication
Max. Print Length(mm) 5X : W(max):350, D(max):350, H(max):350
7X : W(max):370, D(max):390, H(max):450
W(max):380, D(max):390, H(max):450 (Expanded print mode)
Print Layer Thickness Setting 0.05~0.4mm
Basic Nozzle diameter 0.4mm
Filament width 1.75mm
Printable materials * Sindoh : PLA, ABS, FLEXIBLE, PVA(Water-soluble) PVA+(Water-soluble)
* Open Material : PLA, ABS, FLEXIBLE, PVA(Water-soluble), ASA, PETG, etc
Printable color White, Black, Gray, Red, Yellow, Green, Blue, Pink(PLA), Purple(PLA)
Bed leveling Auto leveling
Print Head Two Nozzle
* Using filament containing abrasive additives (e.g. metal component, carbon fiber) may cause the breakdown
of the machine and will shorten its life time drastically.
1.2 Temperature/Speed
Continuous Nozzle Usage/ Maximum
Temperature
Recommended Temperature(Nozzle): PLA 200℃, ABS 230℃, Flexible
235℃, PVA 215℃, PVA+ 200℃ / Max 250℃
Continuous Bed Usage/ Maximum
Temperature
Recommended Temperature(Bed): PLA 55℃, ABS(Side A) 90℃,
ABS(Side B) 100℃, Flexible 55℃ , PVA(PVA+) 55℃ / Max 110℃
Recommended printing speed/
maximum speed
PLA 80mm/s, ABS 80mm/s, PVA(PVA+) 25mm/s,
FLEXIBLE 30mm/s Recommended / 200mm/s max
* Continuous operation at maximum temperature can cause malfunction, Please use in case of nozzle clogging or
other troubles.
1.3 Machine
Power Max. 1000W
Dimensions 864 x 810 x 1690(W x D x H)
Weight 167kg (excluding cartridge)
Port USB Device, USB Host , Wifi, Ethernet
Cartridge Auto Load / Unload
1.4 Software/Support
Supported Software Sindoh Exclusive Slicer
Supported File Format *.stl, *.ply, *.obj, *.gcode, *.amf
Supported Operating System Windows 7 or above, Mac OSX 10.10 or above
Recommended Memory Requirements DRAM 8 GB+ / VRAM 2 GB+ (5X, 7X model only)
Note
- Graphics must support OpenGL 2.0 or higher.
- This product can be utilized with Alexa Echo for hands-free control. Please refer to the below URL for more
details on how to use.(https://3dprinter.sindoh.com/support/downloads)