Sindoh 3DWOX 7X - Printing Via PC; CLOUD Printing

Printing
3-8
3
Reference
- Methods of removing printables refer to P. 4-2 “1. Printed Output Check”.
1.2 Printing Via PC
1 Prepare PC connected to the same network where the printer is connected to.
2 Run 3DWOX Slicer program.
3 Press the [Print] button.
4 Following Steps (Same as steps 3~9 of printing via USB)
Note
- Pause, print cancelation, please refer to P.3-2 Printing from USB Flash Drive.
- Refer to “3DWOX Desktop Manual” for the details.
1.3 CLOUD Printing
To begin using the Cloud Print function, users must register the printer to the server.

1
 On the Home window, click the
[Cloud]
button.
- When the user clicks [CLOUD] on the Home screen, the available CLOUD App is listed.
