Sinexcel INTERSTELLAR Series - Technical Standards (Part 1)

13
2.6 Standards
Interstellar is designed according to the European standard and meets the industrial standards in terms of
function and performance. The specific technical standards are shown in the table below.
NO.
Standard
number
Title
1
BS EN
IEC61851-1:2019
Electric vehicleconductive charging system. General
requirements
2
IEC62196-1:2014
Plugs, socket -outlets, vehicle connectors and vehicle inlets -
Conductive charging of electric vehicles- Part 1: General
requirements
3
IEC62196-2:2017
Plugs, socket-outlets, vehicle connectors and vehicle inlets.
Conductive charging of electric vehicles.
4
IEC62955-2018
Residual direct current detecting device (RDC-DD) to be used
for mode 3 charging of electric vehicles
5
IEC60947-2：
2016
Low-voltage switchgear and control gear -Part 2: Circuit-
breakers
6
EN 301 489 -1
V2.2.0(Draft)
EMC standard for radio equipment and services;
Part 1: Common technical requirements
7
EN 301 489 -1
V2.1.1(Final
draft)
EMC standard for radio equipment and services;Part
1: Common technical requirements
8
EN 301 489-52
V1.1.0(Draft)
EMC standard for radio equipment and services;
Part 52: Specific conditions for Cellular CommunicationMobile
and portable (UE) radio and ancillary equipment
9
EN 61000 -6-
1:2007
EMC - Part 6
-
1: Generic standards -Immunity for residential,
commercial and light -industrial environments
10
EN 61000-6-
3:2007+A1
EMC - Part 6 - 3: Generic standards-Emission standard forresidential,
commercial and light -industrial environments