1. Safety
1.1 General safety instructions
●This product is an integrated charger that can charge electric vehicles in indoor and outdoor areas.
●Please use and save the product information and accessories that are shipped with the device properly.
●If any problem or failure occurs during use, please consult the manufacturer directly. If the user resorts
to a third party or a non-professional person for maintenance during the warranty period, any security
consequences shall be borne by the user.
●The installation environment of charging equipment should be far away from fire and other dangerous
sources.
1.2 Safety instructions for use
●Please read the user manual carefully before use, and strictly follow the steps.
●Without the permission of the manufacturer, it is strictly forbidden for the user to disassemble the product
and do other improper operations. Any undesirable consequences caused by improper operation shall be
borne by the user.
●Do not touch the charging plug or the charging socket of the electric vehicle. Keep the charging plug in a
dry state. Do not touch the charging plug with water.
●Do not use the charging device when the connector is damaged or the insulation is damaged.
●Ensure that nothing remains in the charging plug and the charging socket on the vehicle side.
●Lock the door correctly after installation or maintenance operations.
In these situations, do not use the EVSE and contact to the manufacturer immediately
：
●Damage on the enclosure
●Damage on the AC charger or connector
●Lighting hits the EVSE
●Accident or fire near the EVSE
●Water has entered the EVSE
If an emergency occurs during the operation
of this product, please press the emergency
button immediately. Do not use the emer-
gency button in non-emergency situations!
To Next Page
Loading...