5. Maintenance and cleaning
5.1 Maintenance and cleaning
1
）
Please check whether there is damage on the cabinet cover
,
outlets
,
cables and connectors every
time before use.
2
）
Please check whether there is damage on the display every time before use.
3
）
Please use low pressure water to clean the enclosure of the EVSE every 4 months. In case of stubborn
dirt, please apply a cleaning agent and clean it manually. Do not use corrosive tools.
Note: If you see any damage, please contact the manufacturer. Refer to chapter 8.
5.2 Disassemble the connector cable
1) Remove the cover panel on the housing.
To Next Page
Loading...