Singer 141G-20CE - Trouble Shooting

One-Touch
If the machine stops at intermediate
pedal switch has been installed to
tor into the electric control con-
Figure 33
1
and press the switch ‘1’, the needle
raised
up to the up position.
If the machine stopped at the end
press to correct by one stitch for-
ward.
When the machine head and foot
the machine, loosen the set screw
20
| Instruction Manual and Parts List
3.23
Function of
Switch
Needle up or stitches correction
of the each seams, the swithc ‘1’ is
Foot Pedal
3.24
Connection of
Switch
‘1’ from the cover ‘2’. (Figure 34)
Put the foot pedal switch connec-
nector ‘3’, then test the machine.
Figure 34
Figure 35
confirmed, install the cover ‘2’ by
the set screw ‘1’ .
After the sewing performance is
(Figure 35)
Integrated Direct Drive Automatic Thread Trimmer Lockstitch Sewing Machine
2
1
3
The cover ‘2’ slide to the arrow
direction.