Singer 321C - 1 Safety Instructions; Important Safety Instructions

1
High Speed Overlock Machine | Instructions Manual and Parts List
Safety Instructions
1.1
Important Safety
Instructions
Important
•Beforerunningthemachine,make
sure all relevant safety specifica-
tions are adequate to specifica-
tions and technical standards in
yourcountry.
•The machine should not be run
withoutitssafetydevices.
•The machine should only be oper-
atedbyproperlytrainedpersonnel.
•Foryoursafety,gogglesmustbe
usedwhilerunningthemachine.
•Turnofforunplugthemachinein
thefollowingsituations:
•Passing the thread by the nee-
dle or replacing the bobbin or
looper.
•Replacing the needle, presser
foot,throatplate,feeddogand
slidingplate.
•Whenthe machineisinmain-
tenance.
•When the operator is not run-
ningthemachine.
•In case of lubricant oil contact
with the eyes or skin, wash the
surface with plenty of icy water.
Incaseofingestion,seekmedical
helpimmediately.
•Repair, fitting or maintenance
should only be performed by
properlytrainedpersonnel.
•Maintenance and repair on elec-
tric equipment should only be
made by qualified personnel. If
any electric device is damaged,
the machine should be immedi-
atelystopped.
•Beforestartingthemachineinfull
running,atestmustbeconducted
toassurethatmachineandopera-
torareabletoperformthetask.
•Themachineshouldnotbeplaced
nexttoasoundsourceasanultra-
sonicweldingmachineandother
equipment.
•The machine should only be run
with the proper electric cable
andconnectors,andalsothead-
equategrounding.
•Themachineshouldonlybeused
to sew materials as indicated in
itsinstructionsmanual,andindi-
cationsofuseshouldbefollowed.
Singer will not be held responsible
for any damage caused by unau-
thorized changes in the product.
When using the
machine, basic
safety procedures
must be followed.
Read with attention
all instructions before
using the machine.
When using it,
understand that
all basic safety
instructions are
not limited to the
following items.
Read all instructions,
take care of this
manual, and use it
as reference when
necessary.