Singer 4843116 - Zippers and Piping

1
2
I
I
I
3
Zippers and piping
I
Set the machine as illustrated. Dial selector on " _"
I
Set machine as illustrated on the left.
Set stitch length control between "1"
thickness of fabric).
"4" (according to
Change to zipper foot. (1)
The zipper foot can be attached right or left, depending on
which side of the foot you are going to sew. (2)
To sew past the zipper tab, lower the needle into the fabric,
raise the presser foot and push the zipper tab behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew a length of cord into a bias strip to
form a "welt" or piping. (3)
52