5, 6, 8, 10 Stitch Sewing Machines
3 Straight stitching
Stitch width selector
Before you move the selectors to set your machine for
straight stitching, turn the hand wheel toward you until
needle is at its highest point.
Straight stitching can be performed with pattern
selector in any position; stitch width lever must be set
at only.
Needle position selector
Needle Position Selector positions the needle in left
(
) center ( ) or right ( ) needle positions.
Stitch length selector
The stitch length indicator is numbered O to 5. The
lower the number, the shorter the stitch. Shorter
stitches are best for lightweight fabrics; longer ones
for heavy fabrics. To adjust the length of your stitches,
turn the dial so that desired stitch length is positioned
under ( * ) symbol.
* To shorten stitch length, turn dial toward a lower
number.
* To lengthen stitch length, turn dial toward a higher
number.
Reverse stitch button
The reverse stitch button with the (???) symbol, is
located in the center of the stitch length selector.
* For reverse stitching, push in the button and hold in
place. The machine will stitch in reverse only as long
as you keep the button pushed in.
18
To Next Page
Loading...
Need help?
General