70
7. Machine will sew the buttonhole in the order as
shown and stop automatically after sewing.
8. Press the thread cutter button and raise the
presser foot to remove the fabric.
To sew over same buttonhole, raise presser foot
to return to original position.
9. Cut center of buttonhole being careful not to cut
stitches on either side. Use a pin as a stopper.
CAUTION: To prevent accidents.
When using seam ripper, do not put your fi nger in
the path of ripper.
Note:
A. For sewing buttonholes on hard-to-sew fabrics
or along the edge of multi-layered garments,
install the underplate. Place the fabric between
the underplate and buttonhole foot.
1 2 3 4 5 6
1 2 3 4 5
1 2 3 4
1 2 3 4 5
1 2 3 4
1 2 3 4 5
1 2 3 4
1 2 3 4
1 2 3
1 2 3 4 5
To Next Page
Loading...
