Stretch Overedge
collars, sleeves, skirt hems, etc. on loosely knit and
woven fabrics.
Stretch overedge is ideal for sewing decorative
Set differential feed adjusting lever knob above
graduation “1.0”.
To sew a seam, apply gentle tension to the fabric
by holding the seam lightly in front and back of the
presser foot.
Note: * If amount of “stretch” is not correctly set in
relation to the fabric being sewn, the fabric
seam. In such case, reset differential feed
adjusting lever closer to the center mark.
*
normal overedge stitching.
To set the differential feed adjusting lever
is apt to shift away from the needle
resulting in improperly sewn overedge
Be sure to reset the differential feed
adjusting lever to graduation “1.0” for
24
To Next Page
Loading...
