4 – Introduction
English
Presser Feet
All Purpose Foot (T)
(attached to the machine upon delivery)
This foot is used for general sewing on most types of fabric. The bottom of the foot is at, so that the fabric
is held down rmly against the feed teeth while sewing. It also has a wide slot so that the needle can move
from left to right, depending on which stitch you sew.
F
Blind Hem Foot (F)
The Blind Hem Foot is used for sewing blind hems in garments and home decor. There is an adjustable
guide with an extension at the front, used to guide the fold of the hem while stitching.
Zipper Foot (I)
This foot is used for inserting zippers. Attach the foot to the presser foot holder on either side of the foot,
depending on which side of the zipper is being sewn. The Zipper Foot can also be used to create and insert
piping.
One–Step Buttonhole Foot (D)
This foot allows you to make perfectly sized buttonholes for your button. It has a space at the back for a
button, used to set the size of the buttonhole. The machine will automatically sew a buttonhole to t that
button size.
Satin Stitch Foot (A)
The Satin Stitch Foot is used for satin stitches and other more dense decorative stitches. It has a groove on
the underside that allows the dense stitching to pass freely underneath the foot.
Open Toe Foot
The Open Toe Foot is used for satin stitch appliqués and other decorative sewing.
H
Button Sewing Foot (H)
The Button Sewing Foot is used for easily sewing buttons on your projects by machine, as an alternative to
sewing buttons manually. The foot sits on top of the button, with the opening positioned around the holes.
To Next Page
Loading...
Need help?
General
