-9-
Operation
Step one: Switch on the power supply.
Press the POWER button and the indicator will light as shown below.
Preparation
1.
2.
Connect the water inlet
hose to the water tap.
Turn on the water tap.
5. Put suitable wash load
into the inner tub.
3. Plug in the power cord.
6. Add suitable detergent
according to the wash load
volume into the detergent
box.
7. Close wash lid completely.
(or else, it will not to spin
and give alarm)
OPERATION
4. Insert the end of the drain
hose into the hook shelf,
and hang the drain hose
over a drain outlet.
0.7m~1.2m
预约
COLD
START
PAUS E
WATER
LEVEL
P R OCE S S
WATER
SUPPLY
HIGH
MIDDL E
LOW
LITTL E
GENTLE
WAS H
ONLY
SPI N
ONLY
BLANKET
SPEEDY
JEANS
UND ER-
WAR E
HEAV Y
WAS H
To Next Page
