-4-
INSTALLATION
Place the washing machine on a firm and level surface, use the level
adjustment knob to regulate the adjustable foot until the washing machine is
stable.
1. Take out the noise-proof plate.
2. The entrance is in the front
of the base.
3. Insert the noise-proof plate
into the base.
Insert the noise-proof plate into the washing machine base
Place the washing machine
at least 5cm away from the
wall.
Alternation of adjustable foot
In order to prevent vibration during
operation, you can loosen the level
adjustment knob and regulate the
adjustable foot until the washing
machine is stable, and then tighten
it. (The inclination angle of the
washing machine should not be
more than 2 degrees.)
5cm
Loosen Tighten
4. Lay down the washing
machine, fasten the two
screws.
To Next Page
Loading...
