How to fix no steam on a Singer SteamCraft Plus Iron?
If your Singer Iron is not releasing steam, there are a couple of things to check. First, make sure there is enough water in the Water Tank by filling it according to the instructions in this manual. Second, ensure that the Steam Selector is in the Steam ON position.
What to do if the steam burst isn't working on my Singer SteamCraft Plus?
If the Steam Burst function isn't working on your Singer Iron, it could be due to low water in the Water Tank; if this is the case, fill the Water Tank using the instructions in this manual. Alternatively, if it's the first time you're using the function, press the Burst of Steam Button a few times until Steam Burst is released.
What to do if my Singer SteamCraft Plus is not releasing spray mist?
If your Singer Iron is not releasing spray mist, there are two possible reasons. First, the water level in the Water Tank might be low; if so, fill the Water Tank using the instructions in this manual. Second, if it's the first time you're using the spray function, press the Spray Button a few times until spray mist is released.
General| Type | Dry & Steam iron |
|---|---|
| Cord length | 3.7 m |
| Control type | Buttons, Rotary |
| Product color | Grey, Mint colour |
| Soleplate type | - |
| Variable steam | Yes |
| Water tank capacity | 0.3 L |
| Auto power off after | 30 min |
| Steam boost performance | - g/min |
| Iron power | 1750 W |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
Instructions for initial setup and preparation of the steam iron.
Step-by-step guide on how to fill the iron's water reservoir.
Instructions for selecting the appropriate heat setting for different fabrics.
Steps for operating the steam iron and selecting temperature settings.
Details on using burst steam, vertical steaming, and spray functions.
Information on auto shut-off, draining, anti-drip, anti-scale, and self-cleaning.
Guidance on cleaning the iron and its soleplate.
Advice and tips for effective and safe ironing practices.
Details on the warranty coverage, exclusions, and limitations.
To Next Page