Sinoboom GTJZ1012E - Fall Hazards

© Mar. 2022 3-6 GTJZ0612E&0812E&1012E&1212E Operation Manual
SAFETY
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum lateral
force allowed is:
GTJZ0612E: 400N (90 lbf) indoor/
outdoor
GTJZ0812E: 400N (90 lbf) indoor/
outdoor
GTJZ1012E: 400N (90 lbf) indoor/
200 N (45 lbf)
outdoor
GTJZ1212E: 400N (90 lbf) indoor/
200 N (45 lbf)
outdoor
• Do not change any machine parts
that may affect safety and
stability.
• Do not replace key parts that af-
fect machine stability with parts of
different weights or
specifications.
• Do not change or modify moving
aerial platforms without the manu-
facturer’s written permission.
• On the platform, do not attach an
additional device for placing tools
or other materials to the guardrail.
This will increase the platform
weight, surface area and load.
• Do not put ladders or scaffolding
on the platform or any part of this
machine.
• Do not use additional devices to
increase the working height of the
machine.
• Do not use the machine on any
mobile or movable surface or ve-
hicle. Ensure all tires are in good
condition, the slotted nuts tight-
ened and the cotter pins
complete.
• Do not use a battery that weighs
less than the original lead acid
battery (30 kg [66 lb]) or lithium
battery (60kg [132lb]). Do not use
a battery that weighs less than the
original lead acid battery (40kg
[88lb]) or lithium battery (60kg
[132lb]) about GTJZ1212E. The
battery not only provides power,
but also serves as a
UNSAFE OPERATION HAZARDS
counterweight. The battery is vital
to maintaining the stability of the
machine.
• Do not place or attach any sus-
pended load onto any part of the
machine.
• Do not use the machine as a
crane.
• Do not use the platform to push
the machine or other objects.
• Do not allow the platform to touch
nearby objects.
• Do not tie the platform onto near-
by objects.
• Do not put the load outside the
platform.
• When the platform is caught or
stuck or when other objects in the
vicinity impede its normal move-
ment, do not use the platform con-
troller to lower the platform. If you
intend to lower the platform with
the ground controller, you must
operate it only after all personnel
have left the platform.
• Do not operate the machine when
the chassis door box is open.
• When one or more of the ma-
chine’s tires are off the ground,
evacuate all personnel before at-
tempting to stabilize the equip-
ment. Use a crane, forklift or other
suitable apparatus to stabilize the
equipment.
FALL HAZARDS
At a minimum, operators must operate and maintain the
machine as stated in Operation Manual and in the
Maintenance Manual in addition to following more
stringent industry regulations and workplace rules.