© Mar. 2022 7-10 GTJZ0612E&0812E&1012E&1212E Operation Manual
OPERATING THE MACHINE
platform controller will be on, and the maximum
height of the platform is 11.9m (39 ft), but when the
platform height reaches 9m (29.5 ft), the platform
will stop rising, with "Id" displaying on the platform
controller. At this time, restore the joystick to the
neutral position and release the joystick, push the
"indoor/outdoor mode select switch" upwards to
select the outdoor mode and then pull it down to
select the indoor mode, then hold the "enable
switch" of the joystick and push the joystick forward,
the platform will continue to rise to 11.9m (39 ft).
DTC SYSTEM
1. Press and hold the combined keys ("lift enable
switch" + "high/low drive speed select switch") on
the platform controller for at least 3s to switch
indoor/outdoor modes.
2. After the outdoor mode is selected, the decimal
point in the bottom-center on the display screen of
the platform controller will be off, the battery level
will be switched to “Od”on the screen, and the
battery level will be displayed again after the
combined keys are released.The maximum height
of the platform is 9m (29.5 ft), that is, when the
platform height reaches 9m (29.5 ft), the platform
will stop rising, with "Od" displaying on the platform
controller.
3. After the indoor mode is selected, the decimal point
in the bottom-center on the display screen of the
platform controller will be on, the battery level will
be switched to “Id”on the screen, and the battery
level will be displayed again after the combined
keys are released.The maximum height of the
platform is 11.9m (39 ft), but when the platform
height reaches 9m (29.5 ft), the platform will stop
rising, with "Id" displaying on the platform controller.
At this time, restore the joystick to the neutral
position and release the joystick, then hold the "-
enable switch" of the joystick and push the joystick
forward, the platform will continue to rise to 11.9m
(39 ft).
To Next Page
Loading...
