TB18 Plus&20J Plus Operation Manual 10-1 © Apr 2022
10 DECALS/NAMEPLATES INSPECTION
Use appropriate inspection methods to check that all
decals are easy to identify and properly placed.
Replace any lost or damaged safety decals.
Clean safety decals with neutral soap and water. Do not
use solvent-based cleaners, which may damage safety
label materials.
Do not operate machines without decals/nameplates.
UNSAFE OPERATION HAZARD
All safety labels must be legible to
alert personnel of safety hazards.
Replace any illegible or missing
labels immediately. Safety labels
removed during any repair work must
be replaced in their original position
before the engine is placed back into
service. Do not operate the engine if
there are missing or badly worn
safety labels.
To Next Page
Loading...
