To Next PageTo Next Page
Need help?Do you have a question about the Sinoboom AB10ERJN and is the answer not in the manual?
Details the physical dimensions of the machine including length, width, height, and wheelbase.
Outlines key operational specs like platform height, working height, reach, speed, and capacity.
Covers motor power, hydraulic capacity, system pressure, battery specs, and ground bearing data.
Identifies and lists all major components of the machine with a diagram.
Describes the stowed and operating/raised positions of the machine's booms.
Explains safety alert symbols, definitions, and procedures for reporting accidents.
Details risks of electrocution, minimum safe distances, tipping hazards, and rated load.
Covers hazards related to terrain, wind, obstacles, and general jobsite conditions.
Addresses risks from improper operation, falls, collisions, and crushing.
Warns about explosion, fire, battery issues, and hydraulic system dangers.
Covers risks from damaged machines, bodily injury, and procedures after use.
Discusses hazards and necessary precautions for welding operations.
Lists hazardous jobsite conditions to check for before operation.
Provides general advice and tips for conducting pre-operation checks.
Details steps for inspecting the entire machine, specific parts, and fluid levels.
Outlines how to inspect the battery's condition, connections, and electrolyte level.
Covers preparing the test area and verifying ground/platform controller functions.
Describes tests for drive speed, emergency lowering, tilt protection, and weighing systems.
Discusses machine stability, emergency stop procedures, and lowering functions.
Details procedures for towing, dragging, and operating from ground or platform controls.
Covers safe driving on slopes and procedures for charging the machine's battery.
Outlines safety precautions for transporting and lifting the machine.
Provides step-by-step instructions for lifting and transporting the machine by crane or vehicle.
Lists general rules and responsibilities for performing maintenance.
Explains maintenance schedules and how to complete inspection and repair reports.
Provides instructions for checking, cleaning, and replacing safety decals and nameplates.
Lists specific decals and their locations for various standards (GB, CE, ANSI, CSA, AS).
A visual chart explaining various symbols used throughout the manual.
Instructions and template for preparing a work record before machine delivery.
Provides forms for documenting machine repairs and inspections.
General| Brand | Sinoboom |
|---|---|
| Model | AB10ERJN |
| Category | Lifting Systems |
| Language | English |
