EasyManua.ls Logo

Sinocare iCan i3 Startup Guide

Sinocare iCan i3
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Get Started
Step 1: Install iCan CGM App
CGM APP-Start up Guide
Continuous Glucose Monitoring System
1
Step 2: Login to Your iCan CGM Account
Pair with Transmitter
Step 2: Check SNSerial Number
Codes to Match
Step 3: Pair with the Transmitter
Check the first 8 digits SN codes of Sensor Pack and
Transmitter SN codes to match with each other before
pairing your Sensor with the Transmitter.
a. Open your App and make sure to turn Bluetooth on.
b. Login to your account, and using your App to scan the QR Code on the
Sensor Pack.
c. Pairing happens automatically. Do not close the app and keep it within 6
meters while you proceed to the next step. If you enter the SN code
manually, please click “Next” to proceed.
d.Keep your phone close by and prepare the insertion in next step
2
Step 1: Pull out the
transmitter pack
Pull out the Transmitter Pack
from the bottom of the Sensor
Pack box.
Sensor Pack
Transmitter Pack
Separate
i3 CGM System Overview
Refer to your User Guide for full System instructions and information.
The User Guide is provided in electronic form. You can visit iCan-cgm.com website to download a PDF.
If you need a hard copy of the User Guide, please contact the dealer or send the request to the emai:
support@icancgm.com. It will be provided
within seven days for free.
If you have any questions, please send the email to
support@icancgm.com
All graphics are representational. Your product may look different.
Sensor Kit
Sensor Pack
Transmitter Pack
Applicator
Safety Switch
Button
Sensor
inside the retractable needle)
2
Get Ready
1
Set Up Mobile App
3
Insert the Sensor
4
Start Monitoring
5
End Monitoring
Transmitter
Transmitter Tray
iCan CGM APP
R
Download the iCan CGM APP from App
Store or Google Play
Sensor PackTransmitter Pack
SN codes
must match
iCan I3 Sensor Pack
Changsha Sinocare Inc.
11 Qingshan West Road,Yuelu District,
Changsha, 410205, P. R. China
36401126-A.X
iCan-cgm.com
YYYY-MM-DD
YYYY-MM-DD
XXXXXXXX
XXXXXXXXXXXXX
S
N
X
X
X
X
X
X
X
X
iCan I3 Sensor Pack
Changsha Sinocare Inc.
11 Qingshan West Road,Yuelu District,
Changsha, 410205, P. R. China
36401126-A.X
iCan-cgm.com
YYYY-MM-DD
YYYY-MM-DD
XXXXXXXX
XXXXXXXXXXXXX
Please scan
the QR code
on the above
a. Login if you already have an account.
b. Tap “Register” on the bottom if you are new to the system.
The App will walk you through informational videos and
screens. Tap “Next” to proceed until it brings you to the
Scanning QR Code page. Keep your App open throughout the
whole time.

Other manuals for Sinocare iCan i3

Questions and Answers:

Sinocare iCan i3 Specifications

General IconGeneral
Device TypeBlood Glucose Meter
ModeliCan i3
DisplayLCD
Sample TypeCapillary Whole Blood
Measuring Range20-600 mg/dL
Test Time5 seconds
Power Source2 x AAA batteries
Operating Temperature10-40°C (50-104°F)
Sample Volume0.6 μL
Automatic Shut-off3 minutes

Related product manuals