13
h. Menus structure
• Functions menu:
"F1 CREATE A PRGM"
"F2 DELETE A PRGM"
• Programs menu:
"Pxx NAME"
Program submenu:
"VACUUM: xx.x%" (10.0% - 99.5%)
"VACUUM PLUS: xxs" (0s - 99s)
"GAS FLUSH: xx.x%" (0.0% - 10% below the vacuum level) (units with gas
option)
"SEAL TIME: x.xxs" (0.00s - maximum unit allocated setting)
"Pxx NAME" (12 characters)
• Diagnostics menu (keys "ESC" & "POWER" for access):
"DIAGNOSTICS MENU" (access code required)
"D1 INPUTS TEST" Show the input status
"D2 OUTPUTS TEST" Test the output of the card
"D3 MODEL SELECT" Select the model of the machine
"D4 GAS OPTION" Enable or disable the gaz option
"D5 SEALING TIME" Set the maximum sealing time
"D6 COOLING TIME" Set the cooling time
"D7 OFFSET CALIB” Show the current vacuum calibration
"D8 VACUUM SENSOR” Enable or disable vacuum sensor
To Next Page
Loading...
