3
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This symbol points out important safety instructions which, if not followed,
could endanger the personal safety and/or property of yourself and
others. Read and follow all instructions in this manual before attempting
to operate your machine.
Failure to comply with these instructions may result in personal injury.
General Operation
Read, understand, and follow all instructions in the manual and on the machine
before starting. Keep this manual in a safe place for further and regular reference and
for ordering replacement parts.
Only allow responsible individuals familiar with the instructions to operate the
machine. Be sure to know controls and how to stop the machine quickly.
Never put your hands near moving parts.
Only allow qualified individuals for the maintenance of your machine.
Remove all obstacles, which may interfere with the machine functions.
Clear the work area such as electrical wires, buckets, knives etc.
Be sure that everyone else is clear of your work area before operating the machine.
Do not sit nor stand on the machine.
Always turn off the machine after your work is done. Never leave a running machine
unattended.
Always disconnect and wait till the machine has cooled before attempting any
maintenance.
Do not wear loose fitting clothes or jewelry as they may get caught in moving parts of
the machine.
Always wear security shoes, to prevent injury caused by moving the machine or
objects falling from the machine.
Never exceed the time limit to seal, which is recommended by the manufacturer. This
is to avoid any damage that may be caused to the sealing bars and to eliminate the
risk of fire in the machine. Thus avoiding corporal burns.
Never touch the sealing bars after they have been used, this will avoid corporal burns.
Wait a few minutes to let the machine cool down before touching.
Always make sure that the sealing bars are well installed in their "Guide Blocks" before
starting a cycle.
To Next Page
Loading...
