58 35 595 D 3329
D 3329.201.01.20.02 02.2009
9
Sirona Dental Systems GmbH 3 General description
Operating Instructions CEREC 3 Certification
3 General description
3.1 Certification
CE mark
This product bears the CE mark in accordance with the provisions of Council
Directive 73/23/EEC
1
of February 19, 1973 concerning electrical equipment
designed for use within certain voltage limits.
Examples of CE mark for connected products:
z EN 60601-1:1990 + A1:1993 +A2:1995 based on IEC 60601-1
z EN 60950:1992 + A1: 1993 + A2: 1993 + A3: 1995 + A4: 1997 based on
IEC 60950
z UL 60950 third edition 2000
3.2 Intended use
This unit produces computer-aided dental restorations, e.g. from natural-
appearing ceramic material. It must not be used for any other purpose.
The intended use also includes observance of the present operating
instructions and the relevant maintenance instructions.
1. Amended by Council Directive 93/68/EEC.
CAUTION: CE mark for connected products
Further products which are connected to the milling unit must also bear the
CE mark. These products must be tested according to the applicable
standards.
NOTE:
If the instructions for operation of the system described in this document are
not observed, the intended safety of the user may be impaired.
To Next Page
Loading...
