To Next PageTo Next Page
Need help?Do you have a question about the SIRS Navigation KCA0101C and is the answer not in the manual?
General| Brand | SIRS Navigation |
|---|---|
| Model | KCA0101C |
| Category | Compass |
| Language | English |
Describes causes of incorrect heading indications and troubleshooting steps.
Provides procedures to test and correct slow compass card movement.
Explains how to identify and address fluid loss or air bubbles in the compass.
Discusses issues related to magnetic correction during aircraft installation.
Details the steps for adjusting magnetic correctors to resolve errors.
Details the procedure for examining and testing the silicone fluid.
Describes the electrical checks for the compass, including lamp and resistance.
Details the procedure for testing the compass performance at extreme temperatures.
Explains how to perform directional error tests using a test jig.
Details the procedure for testing the compass card's settling time.
Describes how to test for and measure friction errors in the compass card.
Details procedures for testing the range and function of magnetic correctors.
Explains how to test the compass card's freedom of movement when tilted.
Details the steps for removing the corrector assembly.
Provides instructions for removing the bellows and related parts.
Guides the removal of the stem assembly and compass card.
Details the procedure for removing the lamp housing assembly.
Provides instructions for cleaning the stem assembly.
Details procedures for balancing the compass card for specific latitudes.
Outlines steps to check heading errors using a test head and balancing bowl.
Provides detailed steps for filling the compass bowl with silicone fluid using a vacuum chamber.
