Siruba C007KD - 5.3 Accessing Parameter Mode B

8
(3). How to access 【Parameter Mode B】：(Available parameter codes：1~122 )
a. Turn off the power
b. Press hold key and turn on the power to access the first parameter
code 【047.MAC】of【parameter mode B】.
P
S
e. In this area press those key
to make value adjustment.
f. Press
key to save the value.
S
Note 1.After pressing key, it will
go back to【Normal Mode】.
Note 2.Example：on Interlock stitch
machine.
S
.
.
.
.
.
.
c. Press or key to get
the parameter code 【048.N12 】
d.
Use key to enter【parameter
value】
.