EMERGENCY KEYBOARD
CNTR8 - CNTR20
The emergency keyboard allows the use of the system in the event that the
batteries of the handheld are exhausted, in the event that the handheld
is lost or in the event that, for any reason, it is not possible to control the
outputs from the transmitter.
OPERATION
The keyboard reproduces exactly the numbering of the handheld (for the
CNTRNIMBLEPLUS there are only two simplified function keys):
1. Power up the receiver.
2. Wait 3-4 seconds.
3. To execute a command, press the ENABLE
key and at the same time the desired
numeric key on the emergency keyboard.
SYSTEM PAIRING WITH EMERGENCY KEYBOARD
The controller equipped with an emergency keyboard allows PAIRING to
be carried out in a simple and practical way, without having to open the
controller:
1. Remove power from the controller.
2. Press the ENABLE key on the emergency keyboard.
3. Power up the controller by keeping the ENABLE key pressed for 3
seconds; then release the key.
4. Simultaneously press any 3 buttons on the remote control within 15
seconds of switching on.
5. The handheld is now paired with the receiver.
EXAMPLE OF EMERGENCY KEYBOARD
CNTRNIMBLEPLUS
87
To Next Page
Loading...
Need help?
General
