Need help?Do you have a question about the Sitecom MD-270 and is the answer not in the manual?
Choose the wireless network from the list and input the device PIN code into your router.
Select 'Auto' for DHCP server or 'Advanced Setup' for manual IP configuration.
Initiate a scan to find available wireless networks nearby.
Input the network's security key (case-sensitive) and proceed with connection.
Manually type the wireless network name (SSID), which is case-sensitive.
Choose the correct security encryption type for the network.
Choose a previously saved network profile to establish a connection.
Remove a saved network profile from the device's memory.
Choose the wireless network from the list and input the device PIN code into your router.
Select 'Auto' for DHCP server or 'Advanced Setup' for manual IP configuration.
Initiate a scan to find available wireless networks nearby.
Input the network's security key (case-sensitive) and proceed with connection.
Manually type the wireless network name (SSID), which is case-sensitive.
Choose the correct security encryption type for the network.
Choose a previously saved network profile to establish a connection.
Remove a saved network profile from the device's memory.
General| Supported Image Formats | JPEG, BMP, PNG, GIF |
|---|---|
| Output Resolution | Up to 1080p |
| Wi-Fi | No |
| Supported Video Formats | MPEG-4, Xvid, DivX, H.264, VOB, AVI, MOV, MP4, MKV |
| Supported Audio Formats | MP3, WMA, AAC, OGG, WAV, Dolby Digital |
| Video Outputs | HDMI, Composite |
| Audio Outputs | Stereo RCA |
| USB Ports | 2 x USB 2.0 |
| Card Reader | SD |
| Network | Ethernet (10/100 Mbps) |
To Next Page
