Sitecom WLR-4002B - L2 TP over IPSec; General; Name; Connection Type

106
L2TP over IPSec
L2TP over IPSec VPNs enable a business to transport data over the Internet,
while still maintaining a high level of security to protect data.
You can use this type of secure connection for small or remote office clients that
need access to the corporate network. You can also use L2TP over IPSec VPNs for
routers at remote sites by using the local ISP and creating a demand-dial
connection into corporate headquarters.
General
Name Enter a name for your VPN policy
Connection Type Supports IPSec and L2TP over IPSec methods to
establish VPN connection.
Authentication Type Supports pre-shared key method for
authentication.
Shared Key Enter the Shared Key.
Confirm Enter your Shared Key again for verification.
L2TP/PPTP
Authentication Select the desired authentication protocol (PAP,
CHAP, Auto). Select Auto by default.
User Name Enter the username for authentication.
Password Enter the password for authentication.
Network
Server IP Enter the VPN Server IP address.
Remote IP Range Assign a range of IP addresses. The assigned IP
range should be on the same IP network but not
the in the same range as your DHCP IP range.