Wireless Settings
You can set parameters that are used for the wireless stations to connect to this router for the
2.4 GHz radio or 5 GHz radio. The parameters include Mode, ESSID, Channel Number and
Associated Client.
Wireless Function
Enable or Disable Wireless function here. Click Apply and wait for module to be ready & loaded.
Basic Settings
• Band: Allows you to set the AP fixed at 802.11b or 802.11g mode. You can also select
B+G mode to allow 802.11b and 802.11g clients at the same time. For the 5GHz
mode you can set 802.11a, 802.11n, 802.11a/n or 802.11ac mode.
• Guest Network: Enable this to activate the Guest Network. Devices connected to the
Guest network will have Internet connection but no access to the main network and
cannot communicate with each other
To Next Page
Loading...
