• SSID: This is the network broadcast name (SSID) of the router.
• Authentication Mode: It shows the active authentication mode for the wireless
connection.
• Passphrase Key: It shows the passphrase key that is randomly generated by the
wireless router during the WPS process. You may need this information when using
a device which doesn’t support WPS.
• WPS via Push Button: Press the button to start the WPS process. The router will wait
for the WPS request from the wireless devices within 2 minutes.
• WPS via PIN: You can fill-in the PIN code of the wireless device and press the button
to start the WPS process. The router will wait for the WPS request from the wireless
device within 2 minutes.
To Next Page
Loading...
