A2 mini User Manual V1.1
43
2023 SIYI Technology Co., Ltd, All Rights Reserved
Successful Network Communication
Network Communication Failed
2. Input SIYI gimbal camera’s default IP addresses “192.168.144.25” and press
the “Enter” key to check if the communication is successful. If it is, please check
the RTSP addresses in the software or try to switch to another software.
3. If the network didn’t connect, then check the communication between the link’s
ground unit and the air unit. If the communication is successful, then check if the
video cable between the camera and the link’s air unit is good, and if the voltage
input is in normal range.
To Next Page
Loading...
