What to do if an SKF Multilog IMx-S Control Systems sensor repeatedly generates a false alarm?
If a sensor is generating false alarms or varying abnormally, first perform a sensor/cable test. Also, check the sensor mounting. If the issue persists, consider contacting SKF Condition Monitoring Center Luleå.
How to troubleshoot SKF Multilog IMx-S when sensor signal disappears?
If the sensor signal disappears or changes abnormally for single channels, perform a sensor/cable test.
What to do if SKF Multilog IMx-S analogue input gives no signal?
If the analogue input gives a faulty or no signal, perform a sensor/cable test.
How to fix speed signal that is unobtainable/faulty on SKF Multilog IMx-S?
If the speed signal is unobtainable or faulty for a particular machine, test the speed input.
What to do if SKF Control Systems load input gives no signal?
Since the load input acts as an analogue input, start by performing a cabling/input test. If the problem continues, contact SKF Condition Monitoring Center Luleå.
What to do if SKF Control Systems monitor ceases to work with IMx-S unit?
If the monitor stops working with a specific IMx-S unit, check the voltage of the IMx-S unit and examine the Ethernet built-in LED indicator behavior.
Why SKF Multilog IMx-S sensor is not receiving power?
If the sensor is not receiving power, verify the DIP switching. If DIP switching is not the cause, contact SKF Condition Monitoring Center Luleå.
What to do if the fault is in the analogue input part of the SKF Control Systems IMx-S unit?
If the fault is in the analogue input part of the IMx-S unit, contact SKF Condition Monitoring Center Luleå.
General| Brand | SKF |
|---|---|
| Model | Multilog IMx-S Series |
| Category | Control Systems |
| Language | English |
Crucial safety and operational information for a safe and reliable system.
Overview of the IMx-S within the SKF Multilog On-line System product range.
Detailed description and specifications of the IMx-S unit, including models.
Explanation of the system's status indicators, including SYS and PWR LEDs.
Critical safety precautions and site requirements for installing the IMx-S unit.
Guidance on assessing and planning the installation location and layout for the system.
Recommendations for power supply cables, including type and connection requirements.
Detailed instructions for connecting the power cable to the mains power grid safely.
Recommended sensor cable types and routing considerations to maintain signal integrity.
Specifications for Ethernet cables, including types for different lengths.
Information on connecting the IMx-S unit via Ethernet ports and their functionality.
Guidelines for using cable glands and blind plugs for proper enclosure sealing and fire protection.
Details on terminal connections and DIP switch settings for analogue sensors.
Information on terminal lists and DIP switch settings for digital input configuration.
Configuration details for RS485 communication, including termination resistors.
Overview of the IMx-S relay driver outputs and their terminal connections.
Description of the Dig1 buffered output and its connection to a tachometer input.
Steps and considerations for configuring network settings and unit IDs.
Methods for setting and synchronizing the IMx-S unit's time.
Information on the maintenance requirements for the IMx-S hardware.
Diagnosing and resolving issues related to sensor circuits and connections.
Step-by-step guide to troubleshoot non-responsive 2-wire accelerometer channels.
Troubleshooting steps for eddy current probe inputs, including voltage and signal checks.
Diagnosing issues with 4-20 mA channels, checking DIP settings and wiring.
Troubleshooting analogue input channels, verifying connections and voltage measurements.
Steps to troubleshoot digital input channels, including sensor power and signal checks.
Diagnosing issues with relay driver outputs, checking voltage and connections.
Troubleshooting loss of connection to the monitoring system.
Diagnosing communication problems with Modbus RTU and RS485 interfaces.
Specifications related to the operating environment, size, and weight.
Details on the power supply requirements and consumption of the IMx-S unit.
Technical specifications for analogue differential inputs.
Technical specifications for digital opto-isolated inputs.
Specifications for relay driver and system relay outputs.
Details on the analogue measurement capabilities, including AD conversion.
Technical specifications for digital measurement, including frequency range.
Description of signal processing techniques used by the IMx-S.
Information on Ethernet and RS232 service interfaces.
Details on the RAM used for data processing.
Miscellaneous technical details like calibration and certifications.
Information about SKF's quality certifications.
Dimensional drawing of the IMx-S 16 standard cabinet.
Dimensional drawing of the IMx-S 16 stainless steel cabinet.
Dimensional drawings for IMx-S 32 standard and stainless steel cabinets.
A comprehensive list of all terminals on the IMx-S unit.
Guidelines for the proper recycling and disposal of electrical waste.
Details of the warranty terms, conditions, and periods for SKF products.
To Next Page
