SKF SYSTEM 24 LAGD 60 User Manual

4 SKF SYSTEM 24 - LAGD 60 / LAGD 125
EU Declaration of Conformity
SKF SYSTEM 24 LAGD 60 / LAGD 125
We, SKF MPT, Meidoornkade 14, 3992 AE Houten, The Netherlands herewith
declare under our sole responsibility that the products described in these
instructions for use, are in accordance with the conditions of the following
Directive(s):
DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of
26 February 2014 on the approximation of the laws of the Member States
concerning equipment and protective systems intended for use in potentially
explosive atmospheres as outlined in Harmonised Standards and are in conformity
with the following standards:
EN IEC 60079-0: 2018, EN 60079-11: 2012, EN 50303: 2000
EN IEC 63000:2018: Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous substances
II 1 G Ex ia IIC T6 Ga
II 1 D Ex ia IIIC T
200
85°C Da
I M1 Ex ia I Ma
EU-Type Approval:
EU-Type Examination Certificate DEKRA 21ATEX0015 X Issue Number: 0
Issue by DEKRA Certification B.V. (0344)
0537
IECEx Certificate of Conformity:
IECEx DEK 15.0066X
Where in X denotes: –20°C ≤ Ta ≤ + 60°C (LAGD 60/... and LAGD 125/...)
appropiate measures must be taken to prevent electric discharge
RoHS DIRECTIVE (EU) 2015/863 with the exemption 7c-1
Houten, The Netherlands, January 2023
Guillaume Dubois
Manager Quality and Compliance
To prevent electrostatic discharge in hazardous areas,
only wet cleaning is permitted.
Safety recommendations

SKF SYSTEM 24 LAGD 60 Specifications

General

Brand	SKF
Model	SYSTEM 24 LAGD 60
Category	Lubrication systems
Language	English