To Next PageTo Next Page
Need help?Do you have a question about the SKF TLMP 1008 and is the answer not in the manual?
General| Suitable for grease cartridges | No |
|---|---|
| Suitable for loose grease | Yes |
| Model | TLMP 1008 |
| Protection Class | IP65 |
| Maximum grease quantity | 8 liters |
| Type | Automatic lubrication system |
| Number of Lubrication Points | 1 |
| Voltage | 12-24 V DC |
| Weight (Approximate) | Approx. 13 kg without grease |
General guidelines for ensuring safety when using the product.
Rules for safe operation and interaction with the product.
Specifies the authorized applications and usage of the product.
Details prohibited uses and situations that could lead to hazards.
Instructions regarding the prohibition of painting product components.
Warns against unauthorized changes to the product and their safety implications.
Lists activities restricted to authorized personnel or specialists.
Outlines pre-delivery checks performed for safety and functionality.
Refers to additional documents that must be consulted for proper operation.
Explains markings and warnings found on the product itself.
Details information conveyed by the product's type identification plate.
Clarifies the directives and standards associated with the CE marking.
Defines the qualifications required for personnel operating the pump.
Specifies information to be provided to external technicians before work begins.
Details the requirement for operators to provide suitable PPE.
Comprehensive guidelines for handling the product throughout its lifecycle.
Instructions for the first operation and daily startup procedures.
Guidelines for cleaning the product, including precautions.
Identifies potential hazards and their remedies throughout the product lifecycle.
Introduces the purpose and importance of lubricants in the system.
Provides guidance on choosing appropriate lubricants for the system.
Lists materials compatible with the lubricants used.
Explains how lubricant viscosity relates to operating temperature.
Discusses lubricant degradation over time and inspection recommendations.
Provides a table of SKF lubricants and their suitable operating temperature ranges.
Provides fundamental technical specifications for the pump variants.
Details electrical specifications, inputs, and protection types for the product.
Lists default programming settings for various pump parameters.
Specifies torque values for installing and repairing different product components.
Outlines required lubricant consistency for proper low-level signal function.
Describes how reservoir volume varies with lubricant consistency and temperature.
Specifies the quantity of lubricant needed to prime the pump.
Instructions for checking shipments upon receipt and reporting damage.
Guidelines for cleaning and packing products for return.
Details recommended storage conditions to maintain product integrity.
States that only qualified personnel should perform installation, operation, and maintenance.
Provides instructions for mounting the product, considering environmental factors.
Specifies required clearance for maintenance and disassembly.
Details dimensions and hardware for fastening the pump.
Guides on making secure and tension-free electrical connections.
Step-by-step instructions for preparing the pump for operation by filling with lubricant.
Explains the procedure for programming pump settings via the keypad.
Describes the initial start-up process via machine contact or switch.
Explains how to manually initiate an extra lubrication cycle.
Overview of the pump's readiness for operation after setup.
Instructions for refilling the lubricant reservoir while the system is running.
Procedure for temporarily stopping the system by disconnecting power.
Guidelines for final shutdown and environmentally responsible disposal.
States that liability is excluded for faults from improper maintenance or repair.
Notes that there are no customer-maintainable parts.
Provides instructions for cleaning outer surfaces and notes on interior cleaning.
Step-by-step guide for replacing the pump's membrane keypad.
Lists available SSV metering devices with their part numbers.
Identifies the kit of seals and its part number.
Provides the part number for the foam filter.
Lists tubing and connector kits with their part numbers.
Lists the adhesive membrane keypad and its part number.
Identifies the pump element and its part number.
Provides the part number for the M22 x 1.5 adapter.
Lists the transparent 1-litre reservoir with sealing and labels.
Describes the housing cover replacement kit and its contents.
Lists the 24 V DC motor with connection cable.
Details the square plug with a 10 m cable.
Lists replacement kits for control printed circuit boards based on voltage.
Explains cable colours and component abbreviations used in circuit diagrams.
Shows the pin assignments for connection plugs.
Provides the circuit diagram for 24 V DC models with square plugs.
Provides the circuit diagram for 120 V AC models with square plugs.
Provides the circuit diagram for 230 V AC models with square plugs.
