Need help?Do you have a question about the SKF ST-1240-GRAPH and is the answer not in the manual?
General| Number of outlets | 12 |
|---|---|
| Reservoir capacity | 4 liters |
| Voltage | 24 V DC |
| Housing material | Aluminum |
| Protection class | IP65 |
| Suitable lubricant | Oil |
| Material | Aluminum |
| Operating temperature range | -20 to +70 °C |
Covers general operation, intended use, user authorization, and prohibited actions.
Specific safety measures for electrical components, connections, and voltage.
Details user roles, handling procedures, and authorized persons.
Lists prohibited uses, modifications, painting restrictions, and referenced documents.
Explains safety markings, CE/UKCA/RoHS marks, and type plate information.
Details CE, UKCA, and China RoHS marking requirements and meanings.
Covers emergency shutdown procedures and safety measures before maintenance.
Outlines procedures for transport, installation, startup, cleaning, and disposal.
Identifies residual risks and their corresponding prevention or remedy measures.
Provides an overview of the ST-1240-GRAPH as a microprocessor-based control centre.
Identifies main parts, HMI panel, indicator lamps, and connection terminals.
Covers pressure/level inputs, pump outputs, valve/air control, and alarm outputs.
Explains interlocking, warning outputs, and dual pumping centre features.
Describes data logging, analysis, and power failure protection.
Provides the physical dimensions of the control centre unit.
Introduces the touch screen UI and its main components for operation.
Describes the start display, status display, and their elements.
Details the information presented on different lines of the status display.
Describes the function buttons like Channel, Settings, Stop, Extra, Reset.
Lists and describes the different phases of the lubrication program.
Explains user interactions on the status display for control.
Covers displaying and modifying set values, including password access.
Details the parameters available for setting and their descriptions.
Describes the process of changing parameter values after password entry.
Summarizes channel-specific configuration settings.
Details requirements and steps for setting up remote control via web browser.
Describes how to access and log into the Web Gate interface.
Outlines the process for remote control using a mobile application.
Presents a table detailing hazardous substances in components, per China RoHS.
To Next Page
