SKF ST-1240-GRAPH - Residual Risks and Prevention

15
Residual risks
Residual risk
Prevention/remedy
Lifecycle stage: Installation / start-up / operation / setting and retrofitting
Electrical shock caused by a
faulty or incorrectly connected
power cable

device.
Connect all wires correctly.
Torn/broken wires, when
connected to moving devices
of the machines

moving components in use.
Lifecycle stage: Failure, troubleshooting, maintenance, repair / removing from service and
disposal
Electrical shock from a faulty
power cable that has been
connected to electricity supply

device.
Electrical shock from an open
and energised control centre

electrical components.


parts is intact and in place.