4 SKF TKRT 10
EU Declaration of Conformity
TKRT 10
We, SKF MPT, Meidoornkade 14, 3992 AE Houten, The Netherlands herewith
declare under our sole responsibility that the products described in these
instructions for use, are in accordance with the conditions of the following
Directive(s):
EMC DIRECTIVE 2014/30/EU
RoHS DIRECTIVE (EU) 2015/863
and are in conformity with the following standards:
EN 61 326-1:2013, EN 61 326-2-1:2013,
EN 61 326-1:2012, EN 61 326-2-1:2012.
The laser is classified in accordance with the EU norm EN 60 825-1:2014
Houten, The Netherlands, September 2022
Guillaume Dubois
Manager Quality and Compliance
Safety recommendations
• Always read and follow the operating instructions for use.
• Always wear safety goggles when using the tachometer.
• Never stare directly into the laser source.
• Never open the instrument and attempt to adjust the output of
the laser.
• Remove the battery when the instrument is not in use for an
extended period.
• All repair work should be taken care of by an SKF repair shop.
To Next Page
Loading...
