A31F0IB
2
1
1. Retighten lock nuts
2. Retighten rear idler wheel retaining screws
Restart engine and rotate track slowly to recheck alignment.
Reposition snowmobile on the ground.
Rear Suspension
Condition
Visually inspect all suspension components including slider shoes,
springs, wheels, etc.
NOTE: During normal driving, snow will act as a lubricant and coolant
for the slider shoes. Extensive riding on ice or sanded snow, will
create excessive heat buildup and cause premature wear of slider
shoes.
Stopper Straps Condition
Inspect stopper straps for wear and cracks, bolts and nuts for tight-
ness. If loose inspect holes for deformation. Replace as required.
Torquenutto9N•m(80lbf•
in).
84
_________________________
To Next Page
Loading...
