EasyManua.ls Logo

SKIKE V7 FIX - Unstraping; BRAKE ADJUSTING

SKIKE V7 FIX
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual-English
Version 1.4.0303.2016 15
F.2.2 Unstraping
Unstraping takes place in reverse order.
Note: Optimal is a sitting position. If this is not the case, make
absolutely sure the calf shell is undone last!
Front retaining strap (3.a) undo it until it is fully removed from the slot
at the tightening end
Middle strap (3.b) undo it until it is fully removed from the slot at the
tightening end
Undo the calf shell strap (5) and step out
G. BRAKE ADJUSTING
Optimal Surface: Grass or carpet
Take a normal upright posture
Press both knees all the way back
You should be able to feel the brakes engaging with the rear wheels in
this position.
If this is not the case,or the brake engages too early, you need to undo
quick release (5.b) to shift the position of the calf shell and the brake so
that with an upright stand, the brake can be felt engaging without
leaning back.
Quick release (5.b) re-tighten properly. (See Operation Quick Release)
With practice, the brake can be changed so that you only need lean
back slightly before the brakes are engaged.