EasyManua.ls Logo

Skil 1616 - Situations Known to Cause Kick-Back; Stress Analysis Must Be Considered First; Work Area Precautions

Skil 1616
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SITUATIONS
K NOW N
NOTE: While ~ou can't alwavs p~elie~~ 'kick-back from occur-
ing, you can guard against being injured by maintaining
prop~r grip and balance at all times.
S T ·R E S S' 'A:N A l
Y S,I S
: t't' ," •
MUST
, ..;!..t~:; .
UPHILL
Log lying flat on t~"
ground: 'buck" from
the 'top, 'cutting .as
much wood 'as you
can; but not letting
chain hit the ground. .....;,
Roll log, if possible, to put uncut side on top.
-'
Log having one.end hangi~g'1-;;~ir-: cut 1)3 frorn underside. to
avoid splitting -wood,,~str';ipp'ir1g-1Jark
"or
pin..thing'saw-'bar.
~
..
:
.',
..
·W 0 R K·
Prepare imrned iate cutting
area by cleaning out under-
wth likely to interfere
.h operator and saw. Pre-
pare a path of safe retreat
to the rear and diagonal to
the line of fall. Keep all by-
standers from work area.
\
7
T 0
CAUSE
KICK-BACK
.KICK-BACK can occur when removing
saw from cut, if moving chain catches
side of the cut along
top edge of the bar.
KICK-BACK can occur if the chain
at top or nose section of the bar
strikes another log
or other object.
. r
B E
CONSIDERED
FIR S T
'.
.s;
"
When log is gen'~~ally
lying flat, but cut-off
section may sag into
a depression, prevent
binding
err'Saw'
be·
tween cut ends of
logs by making cut
a few .degrees off
squkr~:io that log dropping off is longer at 'bottom than at top.
,~
,"
,
"
i,i
"l
~, ":,.' I
Log supported on 'oath
ends with room' under-
neath for cutti ng: .
if
necessary to avoid
spf
it-
ting large, heavy log,
buck 1/3 from top first.
Otherwise do allcuttinq
from underside causing
cut to widen instead of closing.
P ·R
EeA U T
~ON S
WATCH OUT FOR "SPRING POLES" OR OTHER
HIGH STRESS CONDITIONS
where a log or tree could
spring up or shift when stress is relieved by cutting.