Need help?Do you have a question about the Skil 5246 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Power | 15 Amp |
| Blade Diameter | 7-1/4 inches |
| No-Load Speed | 5, 300 RPM |
| Cutting Depth at 90° | 2-7/16 inches |
| Cord Length | 6 feet |
| Bevel Capacity | 45° |
| Amperage | 15 Amp |
Details power, weight, blade size, and operating speed of the saw.
Highlights features like cutting depth, angles, and line-of-cut indicators.
Lists available accessories with their corresponding SKIL part numbers.
Guide on adjusting the cutting depth using the depth adjustment lever.
Instructions for adjusting the saw's bevel angle for angled cuts.
Details the kerf guide and minimum/maximum depth settings.
Procedure to ensure accurate 90-degree cuts using the saw.
Shows which blades are best suited for different materials like wood and metal.
How to use the rip fence for accurate cuts along material edges.
Step-by-step guide for making plunge cuts with the saw.
Instructions for safely and effectively cutting large panels.
Tips on minimizing splintering, blade quality, and cleaning.
Guidance on starting, operating, and stopping the saw safely.
Information on product warranty, service, and complaint procedures.
Guidelines for tool and accessory disposal and recycling.
To Next Page
