To Next PageTo Next Page
Need help?Do you have a question about the Skil 5400 and is the answer not in the manual?
General| Weight | 10.1 lbs |
|---|---|
| Type | Circular Saw |
| Motor | 13 Amp |
| No Load Speed | 5, 300 RPM |
| Blade Diameter | 7-1/4 inches |
| No-Load Speed | 5, 300 RPM |
| Blade Size | 7-1/4 inches |
| Amperage | 13 amps |
| Arbor Size | 5/8 inches |
| Cord Length | 6 ft |
Provides links to access the manual in different languages.
Guidelines for maintaining a safe work environment and operator personal protection.
Precautions to prevent electric shock, including proper grounding and cord care.
Best practices for using and maintaining tools for safety and longevity.
Instructions on safe handling, guard operation, and hand positioning for circular saws.
Explains what kickback is, its causes, and how it occurs during saw operation.
Techniques for operators to resist kickback forces by maintaining a firm grip and proper stance.
Procedures for handling blade binding and safely restarting the saw in a workpiece.
Advice on supporting large panels and using sharp, undamaged blades to prevent binding.
Alerts users to health risks from dust created by power tool operations.
Explains common symbols used on the tool and their meanings for safe operation.
Identifies various safety and compliance certifications applicable to the tool.
Identifies and labels key parts of the circular saw for user familiarization.
Lists the maximum cutting depths and angles the saw can achieve.
Step-by-step instructions for safely installing or replacing the saw blade.
Explains the function of the Vari-Torque Clutch in preventing kickback.
Details on attaching and using the dust port adapter for chip collection.
How to set the desired cutting depth and check 90-degree cutting angles.
Instructions for adjusting the saw's bevel angle for angled cuts.
Using the line of cut guide and the tool's safety switch mechanism.
Guidance for general cutting, including material-specific warnings for masonry and metal.
Techniques for making internal cuts (pocket cuts) safely and effectively.
How to properly support and cut large panels to prevent binding and kickback.
Instructions for making rip cuts using the rip fence or a board guide.
Guidance on professional servicing, brush replacement, bearing care, cleaning, and blade maintenance.
Recommended extension cord sizes based on tool amperage and cord length.
Outlines the terms, duration, and limitations of the manufacturer's warranty.
