To Next PageTo Next Page
Need help?Do you have a question about the Skil 5665 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Diameter | 7-1/4 inches |
| Amperage | 15 A |
| No-Load Speed | 5300 RPM |
| Cord Length | 6 feet |
| Voltage | 120 V |
| Bevel Capacity | 56 degrees |
| Arbor Size | 5/8 inches |
| Depth of Cut at 90 degrees | 2-3/8 inches |
Declaration of conformity for the circular saw and its article number.
Details specifications of the tool, including dimensions, power, and weight.
Lists and identifies all parts of the circular saw with letter codes.
General safety warnings and guidelines for power tool operation.
Specific safety guidelines for performing cutting operations with the circular saw.
Explains the causes of kickback and provides warnings to prevent it.
Guidelines on the proper use, maintenance, and storage of power tools.
Instructions regarding qualified repair and original replacement parts.
Details the operation and importance of the lower guard.
General safety points not covered elsewhere, including age limits and material restrictions.
Information on using approved accessories and saw blades.
Introduction to the tool and its intended use.
Provides technical specifications for the circular saw.
Lists the different parts of the circular saw.
