To Next PageTo Next Page
Need help?Do you have a question about the Skil 54HD and is the answer not in the manual?
General| No-Load Speed | 5300 RPM |
|---|---|
| Type | Circular Saw |
| Blade Size | 7-1/4 inch |
| Amperage | 15 A |
| Blade Diameter | 7-1/4 inch |
| Arbor Size | 5/8 in |
Guidelines for maintaining a clean, well-lit, and distraction-free work environment.
Instructions for safe use of electrical tools, including polarized plugs and grounding.
Advice on staying alert, dressing properly, and avoiding accidental starting.
Tips for securing workpieces, maintaining tools, and ensuring proper operation.
Explains kickback and provides operator techniques to avoid it.
Identifies and labels the key parts of the circular saw.
Step-by-step guide for safely installing the saw blade.
Instructions for connecting a dust port adapter for chip extraction.
How to set and adjust the cutting depth for the saw blade.
Guidance on using the safety switch to prevent accidental starts.
Procedure to ensure the saw blade is set for a perfect 90-degree cut.
Instructions for adjusting the saw's bevel angle up to 45 degrees.
How to use the foot notch as a guide for straight and bevel cuts.
Proper switch operation, general cutting techniques, and handling interruptions.
Guidance for cutting masonry/metal and using abrasive cut-off wheels.
Procedure for making internal cuts without starting from the edge.
Techniques for safely supporting and cutting large panels to prevent binding.
Instructions for making lengthwise cuts using a rip fence or board guide.
Recommendations for tool service by authorized personnel.
Guidance on lubricating gears and examining carbon brushes.
Information on when and where to replace tool bearings.
Safe methods for cleaning the tool using compressed air and avoiding solvents.
Tips for identifying dull blades and cleaning them.
