Skil BB9504-00 User Manual

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
Belt/Disc Sander
Ponceuse à bande/disque
Lijadora de correa/disco
Model/ Modelo/ Modèle: BB9504-00
1-877-SKIL-999
OR
www.skil.com

Skil BB9504-00 Specifications

General

Type	Belt Sander
Dust Collection	Yes
Corded/Cordless	Corded
Variable Speed	No
Dust Extraction	Yes
Belt Size	3 x 18 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Safe practices for the work environment and preventing accidents.

Personal Safety Precautions

Essential personal safety measures including attire, awareness, and protection.

General Power Tool Safety Warnings

Unintentional Starting & Grounding

Steps to prevent accidental starts and ensure proper tool grounding for safety.

Tool Integrity & Repairs

Guidelines for checking damaged parts and ensuring authorized repairs.

Additional Safety Rules

Safe Tool Usage Practices

Rules for operating the tool correctly and efficiently, avoiding misuse.

Tool Care and Maintenance Basics

Instructions for maintaining the tool's condition and safe operation.

Stability and Location Requirements

Recommendations for securing the tool and choosing a safe operating location.

Additional Safety Rules

Personal Protective Equipment and Operation

What to wear and how to operate safely to avoid entanglement and injury.

Feed Direction and Safety Awareness

Proper workpiece feeding direction and general safety mindset.

Electrical Requirements

Connecting to Power Source

Proper connection procedures and safety warnings for power sources.

Extension Cord Guidelines

Advice on selecting and using extension cords for optimal performance and safety.

Extension Cord Sizing

Understanding Safety Symbols

Safety Alert Symbol Meanings

Definitions of hazard levels like DANGER, WARNING, and CAUTION.

Damage Prevention Messages

Information on preventing equipment or property damage if instructions are not followed.

Understanding Safety Symbols

Electrical and Mechanical Symbols

Symbols related to electrical units, speed, and mechanical settings for tool operation.

Understanding Safety Symbols

Personal Safety Symbols

Symbols indicating the need for eye protection, masks, and hearing protection.

Certification Information Symbols

Unpacking and Checking Contents

Belt/Disc Sander Components Overview

Belt/Disc Sander Components Overview

Sander Component Identification

Detailed descriptions of each numbered part of the belt/disc sander.

Technical Specifications

Assembly and Adjustments

Required Tools for Assembly

List of tools needed for assembling and adjusting the sander.

Installing Sanding Disc and Guard

Step-by-step guide to attach the sanding disc and its protective guard.

Assembly and Adjustments

Installing the Work Table Assembly

Procedures for attaching and securing the work table to the sander.

Squaring the Work Table

How to align the work table perpendicularly to the sanding disc for accuracy.

Assembly and Adjustments

Installing the Sanding Belt

Instructions for correctly fitting and tensioning the sanding belt.

Assembly and Adjustments

Adjusting and Tracking the Sanding Belt

How to align the sanding belt for optimal performance and prevent slippage.

Auxiliary Mounting for Vertical Sanding

Steps to reconfigure the sander for vertical belt sanding operations.

Assembly and Adjustments

Installing the Work Support

Guide to attaching the work support for stable workpiece positioning.

Mounting Sander to Workbench

Methods for securely attaching the sander to a workbench or mounting board.

Operations

Using the ON/OFF Switch and Safety Key

How to safely turn the sander on, off, and secure it with the safety key.

Performing Bevel Sanding

Adjusting the work table angle for sanding bevels up to 45 degrees.

Operations

Surface Sanding Technique

Proper methods for sanding flat surfaces on the belt, including workpiece support.

End Sanding Technique

How to sand the ends of workpieces using the belt in a vertical position.

Operations

Sanding Curved Edges

Techniques for sanding inside and outside curves on the belt and disc.

Operations

Sanding Small End Surfaces on Disc

Using the miter guide and table tilt for sanding small end surfaces on the disc.

Maintenance and Care

Tool Service and Repairs

Guidelines for professional servicing and the importance of authorized repairs.

General Maintenance and Cleaning

Routine checks, cleaning procedures, and storage recommendations.

Troubleshooting Common Issues

Limited Product Warranty