To Next PageTo Next Page
Need help?Do you have a question about the skilsaw SPT70WM and is the answer not in the manual?
General| Motor | 15 Amp |
|---|---|
| Blade Diameter | 7-1/4 inches |
| Bevel Capacity | 53 Degrees |
| Arbor Size | 5/8 inches |
| Amperage | 15 Amps |
| Voltage | 120 V |
| Cord Length | 8 feet |
| No Load Speed | 5, 300 RPM |
| Corded/Cordless | Corded |
| Type | Worm Drive Circular Saw |
Keep work area clean, well-lit, and free from ignition sources.
Ensure proper grounding, avoid wet conditions, and protect cords.
Stay alert, use PPE, prevent unintentional starting, dress properly.
Do not force the tool, use it correctly, ensure switch functions.
Keep hands clear, adjust depth, secure workpiece, use proper grip.
Hold saw firmly, maintain grip, be aware of kickback causes.
Step-by-step guide to attach the saw blade correctly.
Explains the function of the Vari-Torque clutch and its role in preventing kickback.
Instructions for mounting the adjustable auxiliary handle.
How to adjust the cutting depth of the saw blade.
Procedure to check and adjust the saw for a 90° cutting angle.
How to use the line guide notch for accurate cuts.
Instructions on using and storing the saw hook.
How to properly store the wrench on the tool.
How to use a board guide for rip cutting.
Emphasizes using authorized service for repairs to maintain safety.
Guide on checking and adding oil for proper tool lubrication.
Information on checking, replacing, and maintaining carbon brushes.
When bearings become noisy, they should be replaced.
How to clean the tool using compressed air and precautions.
Common causes and remedies for the saw failing to start.
Potential reasons for the blade not reaching full speed.
Causes and solutions for excessive tool vibration.
Troubleshooting steps for inaccurate crosscuts.
Solutions for issues encountered during rip cuts.
What to do if the blade slips and doesn't cut.
