skilsaw SPT84 User Manual

IMPORTANT
Read Before Using
◆
IMPORTANT
Lire avant usage
◆
IMPORTANTE
Leer antes de usar
For English Version
See page 2
◆
Version française
Voir page 53
◆
Versión en español
Ver la página 117
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
1-877-SKIL999 (1-877-754-5999) www.skilsaw.com
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
SPT84
For English Version
See page 2
◆
Version française
Voir page 23
◆
Versión en español
Ver la página 46
14" ABRASIVE CUT-OFF SAW
SCIE À TRONÇONNER ABRASIVE DE 35 CM / 14 PO
SIERRA DE CORTE ABRASIVO DE 14 PULGADAS

skilsaw SPT84 Specifications

General

Type	Worm Drive Circular Saw
Blade Diameter	7-1/4 inches
Motor Power	15 Amps
Weight	14.5 lbs
Arbor Size	5/8 inches
Voltage	120V
Worm Drive	Yes
Electric Brake	Yes
Dust Port	No
No Load RPM	5300 RPM
Cutting Depth at 45 Degrees	1-3/4 inches
Cord Length	8 ft
Maximum Bevel Capacity	53°
No Load Speed (RPM)	5, 300 RPM
Max Cutting Depth at 45°	1-3/4 inches

Summary

Understanding Safety Symbols

Damage Prevention and Information Messages

Informs users of instructions that could lead to equipment or property damage if not followed, often preceded by NOTICE.

General Power Tool Safety

Work Area Safety

Guidelines for maintaining a clean, well-lit work area and keeping children and bystanders away.

Electrical Safety

Precautions regarding plugs, earthed surfaces, rain, wet conditions, and cord usage to prevent electric shock.

Personal Safety

Advice on staying alert, using PPE, preventing unintentional starting, and maintaining proper footing.

Power Tool Use and Care

Service Recommendations

Emphasizes using qualified personnel and identical replacement parts for tool servicing.

Cut-off Machine Safety Instructions

Machine Safety Warnings

Specific safety advice for cut-off machines, including wheel usage, guards, and operator positioning.

Kickback and Related Warnings

Motor Specifications and Electrical Requirements

Electrical Requirements

Details on connecting the saw to a 120V, 15-amp circuit and potential causes for fuse or breaker issues.

Extension Cords

Guidance on selecting appropriate extension cords based on tool amperage rating and cord length.

Symbols

Certification Symbols

Identify Abrasive Cut-off Saw Components

Abrasive Cut-off Saw Specifications

Assembly and Adjustments

Abrasive Wheel Removal and Installation

Step-by-step instructions for safely removing and installing abrasive wheels.

Depth-Stop Bolt Adjustment

Procedure for adjusting the depth-stop bolt to prevent cutting into the resting surface.

Mounting and Transporting

Mounting Saw to Workbench

Instructions for securely mounting the cut-off saw to a workbench for stability.

Transporting the Saw

Operating the Cut-off Saw

Keeping Area Clean

Emphasizes cleaning up dust and chips after cutting operations.

Head-Assembly Lock Pin Operation

Using the Vise Clamp

Long Workpiece Support

Making a Cut

Recommended Cutting Capacity

Tool Maintenance

Service, General Maintenance, and Cleaning

Covers preventive maintenance, general checks, and cleaning procedures for the tool.

Tool Lubrication and Bearings

Information on tool lubrication intervals and bearing replacement needs.

Carbon Brushes

Guidance on inspecting and replacing carbon brushes for optimal motor performance.

Storage

Instructions for properly storing the tool indoors, away from corrosive agents and extreme temperatures.

Motor Brush Maintenance

Troubleshooting Common Issues

Tool Will Not Start

Identifies causes like power connection, tripped breakers, or damaged cords for starting issues.

Wheel Speed Issues

Addresses problems with the wheel not reaching speed due to extension cords or low voltage.

Excessive Vibration

Lists potential causes for excessive vibration, such as wheel imbalance or loose mounting.

SKILSAW Limited Warranty Information