SKMEI (Model 1100) DIGITAL WATCH INSTRUCTIONS
Four buttons on this watch are known as: LIGHT, MODE, RESET, and START
TO SELECT THE DISPLAY MODE
Push the Mode Button in order to select one of the following four display modes in the following
order: Normal Time -> Stop Watch -> Alarm Set, -> Time Reset
In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none
flash). If the alarm icon at the bottom left is displayed, the alarm is turned on.
TO DISPLAY THE DATE
In Normal Time Mode, Press the START button.
TO DISPLAY THE ALARM TIME
In Normal Time Mode, push the RESET button.
A P indicates PM, an A indicates AM. H indicates a 24 hour clock.
If the time is set as a 24 hour clock, the alarm will also show only as 24 hours with a H.
TO STOP/START THE ALARM
In Normal Time Mode, hold the RESET button while pressing the START button to toggle the Alarm
icon on and off.
TO STOP/START THE HOURLY CHIME
In Normal Time Mode, hold the RESET button while pressing the MODE button to toggle the hourly
chime on and off. When all the days of the week are displayed, the hourly chime is on.
To Next Page
Need help?
General
