Skoda SUPERB - 05-2010 - Shift Recommendation for Changing Gears; Multi-Functional Indicator (Onboard Computer)

Instruments and warning lights 19
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data
Shift recommendation for changing gears*
An information for the engaged gear  fig. 17 is shown in the display of the instru-
ment cluster.
In order to minimise the fuel consumption, a recommendation for shifting into
another gear is indicated in the display.
If the control unit recognises that it is appropriate to change the gear, an arrow is
shown in the display. The arrow points up or down, depending on whether it is recom-
mended to shift into a higher or lower gear.
At the same time, the recommended gear is indicated instead of the currently engaged
gear .
Multi-functional indicator (onboard computer)*
Introduction
The multi-functional indicator appears in the display  fig. 18 or in the information
display  page 23 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information:
On vehicles which are fitted out with information display*, it is possible to switch off
the display of some information.
Caution
Pull out the ignition key while having contact with the display (for example when
cleaning) in order to prevent any damage.
Note
 In certain national versions the displays appear in the Imperial system of measures.
 If the display of the second speed is activated in mph, the current speed* is not
indicated in km/h on the display.
Memory
The outside temperature  page 21
Driving time  page 21
Current fuel consumption  page 21
Fig. 17 Recommendation for changing
gears
A
A
A
B
A
A
Average fuel consumption  page 21
Range  page 22
Distance driven  page 22
Average speed  page 22
Current speed*  page 22
oil temperature*  page 22
Warning against excessive speeds*  page 22
Fig. 18 Multi-functional indicator
s3fg.2.book Page 19 Friday, April 30, 2010 12:17 PM