Skoda SUPERB B82017 - Import Your Own Goals

Import your own goals
Introduction to the subject
Fig. 236
MyDestination application on
the ŠKODA websites
Fig. 237
Websites ŠKODA Connect
In this chapter, destinations are described which can be imported into the Info-
tainment memory.
The own objectives by means of ŠKODA-Application “MyDestination”, In the
user profile on the website ŠKODA Connect Portal or in the application
ŠKODA Connect to be created.
By reading the QR code » Fig. 236 or after typing the following address in the
web browser, more information on the “MyDestination”application is dis-
played.
http://go.skoda.eu/my-destination
Access to the ŠKODA Connect Portal is the website ŠKODA Connect refer to.
This is carried out by reading the QR code » Fig. 237 or after entering the fol-
lowing address into the web browser.
http://go.skoda.eu/connectivity
Goals in vCard format
In the Infotainment memory, a custom destination can be imported in the
vCard format (*.vcf) from an SD card or a USB source.
Import
›
Insert the SD card into the external module or connect a USB source with
the own destination file.
›
In the Navigation main menu, tap on the function surface  →
Manage memory
→ Import destinations (SD/USB) .
›
Select the source and confirm the import.
Route guidance
›
In the Navigation main menu, tap on the function surface

→ Destinations →
 →

.
›
Search for and select the desired imported destination.
Delete own destination
›
In the Navigation main menu, tap on the function surface

→ Destinations →

→

.
›
Tap the function surface

Tap on the desired custom destination.
›
In the destination details, tap the function surface Edit → Delete and confirm
the deletion.
In the application “MyDestination” created POI categories
Import / update
›
Insert the SD card into the external module or connect a USB source with
the POI categories.
›
In the Navigation main menu, tap on the function surface  → Manage memory
→ Update "My POIs" (SD/USB) .
If there is already the same POI category name in the Infotainment memory,
then it will be overwritten during import.
Show POIs in the map
›
In the Navigation main menu, tap on function surface  → Map → Select catego-
ries for POIs → My points of interest (Personal POI) .
›
Select the desired POI category.
The insertion of the symbols of the POI categories in the Google Earth
™
Card is
not possible.

193
Navigation